音声が出ない 「Dummy audio output」のみ表示される

Linux Mintの初心者向けフォーラム
返信する
Smi1990
前相撲
記事: 2
登録日時: 2025年12月11日(木) 22:03

音声が出ない 「Dummy audio output」のみ表示される

投稿記事 by Smi1990 » 2025年12月11日(木) 22:12

はじめまして。
先日Linux Mint をインストールしました。
音がPCのスピーカーから出力されず、困っています。
正直、コマンドなんかもあんまりわかっておらず、わかる範囲でいろいろ試したのですが、治りません。
どなたか自分の設定の悪いところや、解決法などわかる方いらっしゃるでしょうか。

都度、必要な情報あれば開示しますので、どなたか助けていただけると本当にありがたいです。
よろしくおねがいします

System:
Kernel: 6.14.0-36-generic arch: x86_64 bits: 64 compiler: gcc v: 13.3.0 clocksource: tsc
Desktop: Cinnamon v: 6.4.8 tk: GTK v: 3.24.41 wm: Muffin v: 6.4.1 vt: 7 dm: LightDM v: 1.30.0
Distro: Linux Mint 22.2 Zara base: Ubuntu 24.04 noble
Machine:
Type: Laptop System: Dell product: XPS 15 9560 v: N/A serial: <superuser required> Chassis:
type: 10 serial: <superuser required>
Mobo: Dell model: 05FFDN v: A00 serial: <superuser required> part-nu: 07BE
uuid: <superuser required> UEFI: Dell v: 1.24.0 date: 08/10/2021
Battery:
ID-1: BAT0 charge: 75.8 Wh (100.0%) condition: 75.8/97.0 Wh (78.1%) volts: 12.4 min: 11.4
model: SMP DELL GPM0365 type: Li-ion serial: <filter> status: full
Device-1: hid-20:73:60:01:77:08-battery model: BSMRB050 serial: N/A charge: N/A status: N/A
CPU:
Info: quad core model: Intel Core i7-7700HQ bits: 64 type: MT MCP smt: enabled arch: Kaby Lake
rev: 9 cache: L1: 256 KiB L2: 1024 KiB L3: 6 MiB
Speed (MHz): avg: 870 high: 900 min/max: 800/3800 cores: 1: 900 2: 863 3: 900 4: 800 5: 900
6: 900 7: 899 8: 800 bogomips: 44798
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Graphics:
Device-1: Intel HD Graphics 630 vendor: Dell driver: i915 v: kernel arch: Gen-9.5 ports:
active: eDP-1 empty: DP-1, DP-2, HDMI-A-1, HDMI-A-2 bus-ID: 00:02.0 chip-ID: 8086:591b
class-ID: 0300
Device-2: NVIDIA GP107M [GeForce GTX 1050 Mobile] vendor: Dell driver: nvidia v: 535.274.02
arch: Pascal pcie: speed: 2.5 GT/s lanes: 16 bus-ID: 01:00.0 chip-ID: 10de:1c8d class-ID: 0302
Device-3: Microdia Integrated_Webcam_HD driver: uvcvideo type: USB rev: 2.0 speed: 480 Mb/s
lanes: 1 bus-ID: 1-12:5 chip-ID: 0c45:6713 class-ID: 0e02
Display: x11 server: X.Org v: 21.1.11 with: Xwayland v: 23.2.6 driver: X:
loaded: modesetting,nvidia unloaded: fbdev,nouveau,vesa dri: iris gpu: i915 display-ID: :0
screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93")
Monitor-1: eDP-1 model: Sharp 0x1453 res: 1920x1080 hz: 60 dpi: 141
size: 346x194mm (13.62x7.64") diag: 397mm (15.6") modes: 1920x1080
API: EGL v: 1.5 hw: drv: intel iris drv: nvidia nouveau drv: nvidia platforms: device: 0
drv: nvidia device: 1 drv: iris device: 2 drv: nouveau device: 3 drv: swrast gbm: drv: iris
surfaceless: drv: nvidia x11: drv: iris inactive: wayland
API: OpenGL v: 4.6.0 compat-v: 4.5 vendor: intel mesa v: 25.0.7-0ubuntu0.24.04.2 glx-v: 1.4
direct-render: yes renderer: Mesa Intel HD Graphics 630 (KBL GT2) device-ID: 8086:591b
Audio:
Device-1: Intel CM238 HD Audio vendor: Dell driver: snd_soc_avs v: kernel bus-ID: 00:1f.3
chip-ID: 8086:a171 class-ID: 0403
API: ALSA v: k6.14.0-36-generic status: kernel-api
Server-1: PipeWire v: 1.0.5 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active
Network:
Device-1: Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter vendor: Rivet Networks
Killer Wireless-n/a/ac 1535 driver: ath10k_pci v: kernel pcie: speed: 2.5 GT/s lanes: 1
bus-ID: 02:00.0 chip-ID: 168c:003e class-ID: 0280 temp: 42.0 C
IF: wlp2s0 state: up mac: <filter>
Bluetooth:
Device-1: Qualcomm Atheros QCA61x4 Bluetooth 4.0 driver: btusb v: 0.8 type: USB rev: 2.0
speed: 12 Mb/s lanes: 1 bus-ID: 1-4:3 chip-ID: 0cf3:e300 class-ID: e001
Report: hciconfig ID: hci0 rfk-id: 0 state: up address: <filter> bt-v: 4.2 lmp-v: 8 sub-v: 25a
hci-v: 8 class-ID: 7c010c
Drives:
Local Storage: total: 506.75 GiB used: 30.34 GiB (6.0%)
ID-1: /dev/nvme0n1 vendor: Toshiba model: KXG50ZNV512G NVMe 512GB size: 476.94 GiB
speed: 31.6 Gb/s lanes: 4 tech: SSD serial: <filter> fw-rev: AADA4106 temp: 29.9 C scheme: GPT
ID-2: /dev/sda vendor: Lexar model: USB Flash Drive size: 29.81 GiB type: USB rev: 2.0
spd: 480 Mb/s lanes: 1 speed: <unknown> tech: SSD serial: <filter> fw-rev: 8.07 scheme: MBR
Partition:
ID-1: / size: 467.89 GiB used: 27.48 GiB (5.9%) fs: ext4 dev: /dev/nvme0n1p2
ID-2: /boot/efi size: 511 MiB used: 6.1 MiB (1.2%) fs: vfat dev: /dev/nvme0n1p1
Swap:
ID-1: swap-1 type: file size: 2 GiB used: 0 KiB (0.0%) priority: -2 file: /swapfile
USB:
Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 16 rev: 2.0 speed: 480 Mb/s lanes: 1
chip-ID: 1d6b:0002 class-ID: 0900
Device-1: 1-1:2 info: Lexar Media JumpDrive V10 type: mass storage driver: usb-storage
interfaces: 1 rev: 2.0 speed: 480 Mb/s lanes: 1 power: 200mA chip-ID: 05dc:c75c class-ID: 0806
serial: <filter>
Device-2: 1-4:3 info: Qualcomm Atheros QCA61x4 Bluetooth 4.0 type: bluetooth driver: btusb
interfaces: 2 rev: 2.0 speed: 12 Mb/s lanes: 1 power: 100mA chip-ID: 0cf3:e300 class-ID: e001
Device-3: 1-7:4 info: Validity Sensors VFS7552 Touch Fingerprint Sensor type: <vendor specific>
driver: N/A interfaces: 1 rev: 2.0 speed: 12 Mb/s lanes: 1 power: 100mA chip-ID: 138a:0091
class-ID: ff00 serial: <filter>
Device-4: 1-12:5 info: Microdia Integrated_Webcam_HD type: video driver: uvcvideo interfaces: 2
rev: 2.0 speed: 480 Mb/s lanes: 1 power: 500mA chip-ID: 0c45:6713 class-ID: 0e02
Hub-2: 2-0:1 info: super-speed hub ports: 8 rev: 3.0 speed: 5 Gb/s lanes: 1 chip-ID: 1d6b:0003
class-ID: 0900
Sensors:
System Temperatures: cpu: 48.0 C pch: 48.5 C mobo: 43.0 C
Fan Speeds (rpm): cpu: 0 fan-2: 0
Repos:
Packages: pm: dpkg pkgs: 2090
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/official-package-repositories.list
1: deb https: //ftp.udx.icscoe.jp/Linux/linuxmint/packages zara main upstream import backport
2: deb http: //archive.ubuntu.com/ubuntu noble main restricted universe multiverse
3: deb http: //archive.ubuntu.com/ubuntu noble-updates main restricted universe multiverse
4: deb http: //archive.ubuntu.com/ubuntu noble-backports main restricted universe multiverse
5: deb http: //security.ubuntu.com/ubuntu/ noble-security main restricted universe multiverse
Active apt repos in: /etc/apt/sources.list.d/spotify.list
1: deb https: //repository.spotify.com stable non-free
Info:
Memory: total: 16 GiB available: 15.47 GiB used: 2.7 GiB (17.4%)
Processes: 284 Power: uptime: 17m states: freeze,mem suspend: deep wakeups: 0
hibernate: disabled Init: systemd v: 255 target: graphical (5) default: graphical
Compilers: gcc: 13.3.0 Client: Cinnamon v: 6.4.8 inxi: 3.3.34

アバター
aoipuchu
管理人
記事: 69
登録日時: 2025年2月16日(日) 20:32
お住まい: 高知県高知市
連絡する:

Re: 音声が出ない 「Dummy audio output」のみ表示される

投稿記事 by aoipuchu » 2025年12月13日(土) 16:03

こんにちは。
私はLMDE7を使っていますが、コメントがつかない様なので。
「Dummy audio output」のみ表示される
これはどこに表示されているのでしょうか?
aoipuchu
debian12(さくらVPS)https://mypace.sasapurin.com/
debian13(Panasonic Let's note CF-SZ5)
LMDE6(Panasonic Let's note CF-SZ6)
LMDE7(Panasonic Let's note CF-SV7)
Windows11(Panasonic Let's note CF-SV8、CF-SV1)

gi1948
幕内
記事: 177
登録日時: 2013年1月12日(土) 18:57

Re: 音声が出ない 「Dummy audio output」のみ表示される

投稿記事 by gi1948 » 2025年12月14日(日) 14:43

ようこそ、LinuxMintの世界へ
設定→サウンド→サウンドテスト・・・で音出ししてみましょう。

Smi1990
前相撲
記事: 2
登録日時: 2025年12月11日(木) 22:03

Re: 音声が出ない 「Dummy audio output」のみ表示される

投稿記事 by Smi1990 » 2025年12月28日(日) 21:33

すいません。よろしくお願いします。
右下のスピーカーマークをクリックして、サウンドの設定を開くと、デバイスにdummy output が表示されます

Beats
前相撲
記事: 1
登録日時: 2025年12月29日(月) 18:02

Re: 音声が出ない 「Dummy audio output」のみ表示される

投稿記事 by Beats » 2025年12月29日(月) 18:13

Intel Corporation CM238 HD Audio Controller 用のドライバーがうまくロードできていないというような投稿がネットで出てきます。

解決法は snd_soc_avs をブラックリストに追加するようです。

/etc/modprobe.d/alsa-base.conf を下記の内容で作るか、既にあれば追記してください。

コード: 全て選択

options snd-hda-intel model=auto
blacklist snd_soc_avs
下記を参考にしました。
https://askubuntu.com/questions/1512611 ... untu-24-04
2番目の回答者が、上記の内容も説明してくれています。

追加後、再起動すればたぶん音が出るのではないでしょうか。

返信する