ここで質問すべきではないのかもしれませんがないのかもしれませんがお付き合いください。
linuxmint13では問題なくできたのですが、同じパソコンにデユアルブートでlinuxbeanもいれてみているのですが、epsonから同じようにlinux用のドライバーをインストールするまでは一緒なのですが、 なぜか認識されません。
xxxx@red-bean-1F:~$ sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x18d1, product=0x0003) at libusb:001:007
found USB scanner (vendor=0x0411, product=0x01a2) at libusb:001:005
found USB scanner (vendor=0x04b8, product=0x083c) at libusb:001:002
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.
xxxx@red-bean-1F:~$ scanimage -l
scanimage: no SANE devices found
この状況で
xxxx@red-bean-1F:~$ sudo xsane を行うとスキャナーは普通に使用できます
どうすれば克服できるでしょうか?
(管理者権限で何かをやればと記載してあるところもあるのですが、この場合 $ su ではパスワードが違うと言うことで管理者になれませんでした)