初心者で基本的な質問で恐縮なのですがUSBメモリが認識しなく?マウントできず??に
困っています。
初心者すぎましてどういう情報が必要なのかもピンとこず、
認識していない(USBメモリが壊れている?)か単純に
うまくマウントされていないだけなのかもわからないです。
お手数をおかけするのですが、まずは何をチェックし、
どういうコマンド?で確認していけばいいのか
教えていただければ幸いです。
なお、環境はlinuxmint 17.2 Cinnamonの64bitです。
y55811 さんが書きました:すみません、トピ主ですが、USB接続でマウスはつかえているので
USB自体は大丈夫だと思います。
あと、USBメモリを差し込むとUSBメモリのランプが短時間、
ぴかぴか・・・って点滅して消える状況です。
Bus 002 Device 002: ID 056e:6032 Elecom Co., Ltd
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 0411:0111 BUFFALO INC. (formerly MelCo., Inc.)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 003: ID 0566:3107 Monterey International Corp. Keyboard
Bus 004 Device 002: ID 056e:0035 Elecom Co., Ltd
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Usage: lspci [<switches>]
Basic display modes:
-mm Produce machine-readable output (single -m for an obsolete format)
-t Show bus tree
Display options:
-v Be verbose (-vv for very verbose)
-k Show kernel drivers handling each device
-x Show hex-dump of the standard part of the config space
-xxx Show hex-dump of the whole config space (dangerous; root only)
-xxxx Show hex-dump of the 4096-byte extended config space (root only)
-b Bus-centric view (addresses and IRQ's as seen by the bus)
-D Always show domain numbers
Resolving of device ID's to names:
-n Show numeric ID's
-nn Show both textual and numeric ID's (names & numbers)
-q Query the PCI ID database for unknown ID's via DNS
-qq As above, but re-query locally cached entries
-Q Query the PCI ID database for all ID's via DNS
Selection of devices:
-s [[[[<domain>]:]<bus>]:][<slot>][.[<func>]] Show only devices in selected slots
-d [<vendor>]:[<device>] Show only devices with specified ID's
Other options:
-i <file> Use specified ID database instead of /usr/share/misc/pci.ids.gz
-p <file> Look up kernel modules in a given file instead of default modules.pcimap
-M Enable `bus mapping' mode (dangerous; root only)
PCI access options:
-A <method> Use the specified PCI access method (see `-A help' for a list)
-O <par>=<val> Set PCI access parameter (see `-O help' for a list)
-G Enable PCI access debugging
-H <mode> Use direct hardware access (<mode> = 1 or 2)
-F <file> Read PCI configuration dump from a given file
このフォーラムを閲覧中のユーザー: なし & ゲスト[3人]