お忙しい中素早い回答有り難うございます
komichi さんが書きました:「ログイン画面」は端末のrootでmdmsetupででます
何故消えたのかは解りません、ごめんなさい!!
現在「メインメニュ」での変更がおかしいので、私の場合は「ログイン画面」を「メインメニュ」ではずしてもメニュに表示されます
端末のrootでというのはプロンプトが "$" ではなく "#" になっている状態で良いのでしょうか?
普通に端末を起動して su でrootとなりmdmsetupと打ち込むと次のようになりました.
$ su
パスワード:
# mdmsetup
コマンド 'mdmsetup' は見つかりませんでした。もしかして:
コマンド 'dmsetup' - パッケージ 'dmsetup' (main)
mdmsetup: コマンドが見つかりません
そこでdmsetupと打ち込むと次のようになりました.
# dmsetup
Usage:
dmsetup [--version] [-h|--help [-c|-C|--columns]]
[--checks] [--manglename <mangling_mode>] [-v|--verbose [-v|--verbose ...]]
[-r|--readonly] [--noopencount] [--nolockfs] [--inactive]
[--udevcookie [cookie]] [--noudevrules] [--noudevsync] [--verifyudev]
[-y|--yes] [--readahead [+]<sectors>|auto|none] [--retry]
[-c|-C|--columns] [-o <fields>] [-O|--sort <sort_fields>]
[--nameprefixes] [--noheadings] [--separator <separator>]
help [-c|-C|--columns]
create <dev_name> [-j|--major <major> -m|--minor <minor>]
[-U|--uid <uid>] [-G|--gid <gid>] [-M|--mode <octal_mode>]
[-u|uuid <uuid>] [{--addnodeonresume|--addnodeoncreate}]
[--notable | --table <table> | <table_file>]
remove [-f|--force] <device>
remove_all [-f|--force]
suspend [--noflush] <device>
resume <device> [{--addnodeonresume|--addnodeoncreate}]
load <device> [<table_file>]
clear <device>
reload <device> [<table_file>]
wipe_table <device>
rename <device> [--setuuid] <new_name_or_uuid>
message <device> <sector> <message>
ls [--target <target_type>] [--exec <command>] [-o options] [--tree]
info [<device>]
deps [-o options] [<device>]
status [<device>] [--target <target_type>]
table [<device>] [--target <target_type>] [--showkeys]
wait <device> [<event_nr>]
mknodes [<device>]
mangle [<device>]
udevcreatecookie
udevreleasecookie [<cookie>]
udevflags <cookie>
udevcomplete <cookie>
udevcomplete_all <age_in_minutes>
udevcookies
targets
version
setgeometry <device> <cyl> <head> <sect> <start>
splitname <device> [<subsystem>]
<device> may be device name or -u <uuid> or -j <major> -m <minor>
<mangling_mode> is one of 'none', 'auto' and 'hex'.
<fields> are comma-separated. Use 'help -c' for list.
Table_file contents may be supplied on stdin.
Options are: devno, devname, blkdevname.
Tree specific options are: ascii, utf, vt100; compact, inverted, notrunc;
blkdevname, [no]device, active, open, rw and uuid.
見たところデバイス関係のコマンドらしいのでgoogleで "dmsetup" を検索したところ以下のようなサイトが検索されたので
ログイン画面を表示させることはできないと判断しました.
https://access.redhat.com/site/documentation/ja-JP/Red_Hat_Enterprise_Linux/6/html/Logical_Volume_Manager_Administration/dmsetup.htmlさらにgoogleで "mdmsetup" を検索したところ "もしかして : gdmsetup" と表示されたので改めて "gdmsetup" を検索し直すと
https://forums.ubuntulinux.jp/viewtopic.php?pid=45147などが検索され,ログイン画面を変更するためのコマンドだと確認が出来たので実行したところこれも
# gdmsetup
コマンド 'gdmsetup' は見つかりませんでした。もしかして:
コマンド 'dmsetup' - パッケージ 'dmsetup' (main)
gdmsetup: コマンドが見つかりません
となりました.そこで私の環境でgdmsetupが使えなくても,インストール(?)できるかどうか次のように調べて見ました.
# apt-get update
.
.
.
939 kB を 39秒 で取得しました (23.5 kB/s)
パッケージリストを読み込んでいます... 完了
# apt-cache search gdmsetup
#
さらに,mdmsetupも調べてみると
# apt-cache search mdmsetup
#
となりました.私の環境では "mdmsetup" および "gdmsetup" は使用できず,さらにインストールもできないようです.
いろいろ検索などして頑張ってみたのですが現在私にできそうなことはここまでです.
これは改めてMintをインストールし直したほうがいいのでしょうか?
--追記(11/7 09:53)
次のようなサイトを見つけました.
https://github.com/linuxmint/mdm/blob/master/gui/mdmsetup.desktopこれによると /usr/sbin/ に mdmsetup が存在しているようなので root で /usr/sbin/ に移動して ls してみました.
# ls *setup
grub-bios-setup pppoe-setup pptpsetup toshsat1800-irdasetup
残念ながらやはりわたしのPCにはmdmsetupは無いようですorz
もう少し頑張ってみたいと思います.
--追記(11/7 10:00)
上記の関連で
https://github.com/linuxmint/mdmに辿り着いたのですが,ここで配布されている ZIP ファイルをダウンロードしてインストールすればよいのでしょうか?
インストールの仕方もよくわかっていないのですが,"ダウンロード"ディレクトリに"mdm"ディレクトリを作成して
"mdm-master.zip"をダウンロードしました.そして解凍すると"mdm-master"ディレクトリが作られました.
この"mdm-master"ディレクトリで sudo make install とすればよいのでしょうか?