mint14でicカードリーダーのインストールができません

Linux Mintの初心者向けフォーラム

mint14でicカードリーダーのインストールができません

投稿記事by pluma » 2013年5月01日(水) 05:36

PC:amd64
機種ntt-scr3310
OS:mint32bit_mate

パッケージのインストールで

$ sudo apt-get install libccid libpcsclite1 pcscd pcsc-tools libpcsclite-dev

を行った後でpcscdのソースコードを確認すると以下になりました。

↓--------------------------------------------------------------------↓

#! /bin/sh
### BEGIN INIT INFO
# Provides: pcscd
# Required-Start: $local_fs $remote_fs $syslog
# Required-Stop: $local_fs $remote_fs $syslog
# Should-Start: udev hal
# Should-Stop: udev hal
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: Daemon to access a smart card using PC/SC
# Description: The PC/SC daemon is used to dynamically
# allocate/deallocate reader drivers at runtime and manage
# connections to the readers.
### END INIT INFO

# Authors:
# Carlos Prados Bocos <cprados@debian.org>
# Ludovic Rousseau <rousseau@debian.org>

# Do NOT "set -e"

# PATH should only include /usr/* if it runs after the mountnfs.sh script
PATH=/sbin:/usr/sbin:/bin:/usr/bin
DESC="PCSC Lite resource manager"
NAME=pcscd
DAEMON=/usr/sbin/$NAME
IPCDIR=/var/run/pcscd
PIDFILE=$IPCDIR/$NAME.pid
SCRIPTNAME=/etc/init.d/$NAME

# if you need to pass arguments to pcscd you should edit the file
#/etc/default/pcscd and add a line
#DAEMON_ARGS="--your-option"

# Exit if the package is not installed
[ -x "$DAEMON" ] || exit 0

# Read configuration variable file if it is present
[ -r /etc/default/$NAME ] && . /etc/default/$NAME

# Load the VERBOSE setting and other rcS variables
. /lib/init/vars.sh

# Do not start at boot using systemd but start using on-demand
# http://ludovicrousseau.blogspot.com/201 ... stemd.html
if [ $1 = "start" -a -d /sys/fs/cgroup/systemd ]
then
# Do not start from this script
exit 0
fi

# Define LSB log_* functions.
# Depend on lsb-base (>= 3.0-6) to ensure that this file is present.
. /lib/lsb/init-functions

# get LANG variable (code from /etc/init.d/keymap.sh)
ENV_FILE="none"
[ -r /etc/environment ] && ENV_FILE="/etc/environment"
[ -r /etc/default/locale ] && ENV_FILE="/etc/default/locale"

value=$(egrep "^[^#]*LANG=" $ENV_FILE | tail -n1 | cut -d= -f2)
eval LANG=$value

#
# Function that starts the daemon/service
#
do_start()
{
# create $IPCDIR with correct access rights
if [ ! -d $IPCDIR ]
then
rm -rf $IPCDIR
mkdir $IPCDIR
fi
chgrp pcscd $IPCDIR
chmod 0775 $IPCDIR

# Return
# 0 if daemon has been started
# 1 if daemon was already running
# 2 if daemon could not be started
start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON --test > /dev/null \
|| return 1
start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON -- \
$DAEMON_ARGS \
|| return 2
# Add code here, if necessary, that waits for the process to be ready
# to handle requests from services started subsequently which depend
# on this one. As a last resort, sleep for some time.
}

#
# Function that stops the daemon/service
#
do_stop()
{
# Return
# 0 if daemon has been stopped
# 1 if daemon was already stopped
# 2 if daemon could not be stopped
# other if a failure occurred
start-stop-daemon --stop --quiet --retry=3 --pidfile $PIDFILE --name $NAME
RETVAL="$?"
[ "$RETVAL" = 2 ] && return 2
}

#
# Function that sends a SIGHUP to the daemon/service
#
do_reload() {
#
# If the daemon can reload its configuration without
# restarting (for example, when it is sent a SIGHUP),
# then implement that here.
#
start-stop-daemon --stop --signal 1 --quiet --pidfile $PIDFILE --name $NAME
return 0
}

case "$1" in
start)
[ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME"
do_start
case "$?" in
0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
esac
;;
stop)
[ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
do_stop
case "$?" in
0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
esac
;;
status)
status_of_proc -p "$PIDFILE" "$DAEMON" "$NAME" && exit 0 || exit $?
;;
restart|force-reload)
#
# If the "reload" option is implemented then remove the
# 'force-reload' alias
#
log_daemon_msg "Restarting $DESC" "$NAME"
do_stop
case "$?" in
0|1)
do_start
case "$?" in
0) log_end_msg 0 ;;
1) log_end_msg 1 ;; # Old process is still running
*) log_end_msg 1 ;; # Failed to start
esac
;;
*)
# Failed to stop
log_end_msg 1
;;
esac
;;
*)
echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2
exit 3
;;
esac

:

-----------------------------------------------------------
以上

exit 0 をコメントアウトすれば認識するらしいので該当しそうなところをコメントアウトしましたが
できませんでした。旧バージョンのpcscdをインストールも考えていますがどうしたらいいでしょう。
まだmint14でicカードリーダーの設定の情報が出回っていないかもしれませんね。
私と同じ作業をしたなら /etc/init.d/pcscd を見ればこのソースコードは確認できます。
pluma
前相撲
 
記事: 5
登録日時: 2013年5月01日(水) 05:20

Re: mint14でicカードリーダーのインストールができません

投稿記事by pluma » 2013年5月01日(水) 10:59

linux mint14のサポート期間は短いらしいので13を入れようと思います。
13だと情報も出回っているかもしれないので。
pluma
前相撲
 
記事: 5
登録日時: 2013年5月01日(水) 05:20

Re: mint14でicカードリーダーのインストールができません

投稿記事by pluma » 2013年5月01日(水) 16:55

自己解決出来ました。

バージョンを14に上げるとドライバも新しくなっているのかおかしくなっているのか分かりませんがpcscdの仕様が変わっているようです。
それはそれで別の対処法があるものと考えるべきかそれとも方法がないのか分からないですが、バージョンを14に上げた人はそういった
点に注意が必要のようです。これから14->15とmintもバージョンが上がっていきますのでその点の注意も必要と思われます。
pluma
前相撲
 
記事: 5
登録日時: 2013年5月01日(水) 05:20


Return to 初心者サポート

オンラインデータ

このフォーラムを閲覧中のユーザー: なし & ゲスト[16人]